Parameters of 120GB SSD with V2.5 Firmware
| General information | |
|---|---|
| Trademark | Unknown |
| Model | 120GB SSD |
| Capacity | 111.7 GB |
| Interface | SATA |
| SATA version | 3.2 |
| Firmware | V2.5 |
| Alternative firmwares | 16 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-3 |
| Advanced Format | not supported |
| Units tested | 3 |
| Times tested | 4 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 439 MB/s |
| Maximum read speed | 389 MB/s |
| Minimum average access time | 0.10 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 23 |
| SCT Transport | not supported |
| Duration of full self test | 1 minutes |
| Maximum temperature | 48°C (118°F) |
| Average maximum temperature | 44°C (111°F) |
| Security | |
| Drive access restriction | not supported |
| Enhanced security erase | not supported |
| Instant information destruction | not supported |
| Hidden partition | not supported |
| Partition access restriction | not supported |
| Trusted Computing | not supported |