Parameters of ADATA XPG EX500 with Firmware 030003
| General information | |
|---|---|
| Trademark | Adata |
| Model | ADATA XPG EX500 |
| Capacity | 931.5 GB |
| Interface | SATA |
| SATA version | 3.3 |
| Form-factor | 2.5" |
| Firmware | 030003 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 5 |
| Times tested | 12 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 112 MB/s |
| Maximum read speed | 40 MB/s |
| Minimum average access time | 0.40 msec |
| Cache buffer | 31.9 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 29 |
| SCT Transport | supported |
| Duration of full self test | 228 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 67°C (152°F) |
| Average maximum temperature | 53°C (127°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 192 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |