Parameters of Corsair Force 3 SSD with Firmware 5.05
| General information | |
|---|---|
| Trademark | Corsair |
| Model | Corsair Force 3 SSD |
| Capacity | 223.5 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | 5.05 |
| Alternative firmwares | 7 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 8 |
| Times tested | 11 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 429 MB/s |
| Maximum read speed | 227 MB/s |
| Minimum average access time | 0.19 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 22 |
| SCT Transport | supported |
| Duration of full self test | 48 minutes |
| Critical maximum temperature | 234°C (453°F) |
| Recommended maximum temperature | 107°C (224°F) |
| Temperature sensor | not supported |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted computing | not supported |