Parameters of Corsair Force GT with Firmware 5.03
| General information | |
|---|---|
| Trademark | Corsair |
| Model | Corsair Force GT |
| Capacity | 223.5 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | 5.03 |
| Alternative firmwares | 4 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 25 |
| Times tested | 72 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 417 MB/s |
| Maximum read speed | 401 MB/s |
| Minimum average access time | 0.10 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 22 |
| SCT Transport | supported |
| Duration of full self test | 48 minutes |
| Critical maximum temperature | 210°C (410°F) |
| Recommended maximum temperature | 120°C (248°F) |
| Maximum temperature | 83°C (181°F) |
| Average maximum temperature | 47°C (116°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted computing | not supported |