Parameters of KINGSTON RBU-SMS151S3128GG with Firmware S9FM02.5
General information | |
---|---|
Trademark | Kingston |
Model | KINGSTON RBU-SMS151S3128GG |
Capacity | 119.2 GB |
Interface | SATA |
SATA version | 3.1 |
Form-factor | < 1.8" |
Firmware | S9FM02.5 |
Firmware upgrade | supported |
SSD controller | Unknown |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 1 |
Times tested | 2 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 342 MB/s |
Maximum read speed | 209 MB/s |
Minimum average access time | 0.40 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 28 |
SCT Transport | not supported |
Duration of full self test | 2 minutes |
Maximum temperature | 62°C (143°F) |
Average maximum temperature | 62°C (143°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 60 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |