Parameters of KINGSTON SA400S37480G with SBFGK1.3 Firmware
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SA400S37480G |
| Capacity | 447.1 GB |
| Interface | SATA |
| SATA version | 3.2 |
| Form-factor | 2.5" |
| Firmware | SBFGK1.3 |
| Alternative firmwares | 42 |
| Firmware upgrade | supported |
| SSD controller | Phison |
| ATA version | ACS-4 |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 3 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 478 MB/s |
| Maximum read speed | 427 MB/s |
| Minimum average access time | 0.24 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | not supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 26 |
| SCT Transport | not supported |
| Duration of full self test | 30 minutes |
| Maximum temperature | 45°C (113°F) |
| Average maximum temperature | 40°C (104°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Complete destruction of information | 20 minutes |
| Instant information destruction | not supported |
| Hidden partition | supported |
| Partition access restriction | supported |
| Trusted Computing | not supported |