Parameters of Netac SSD 240GB with Firmware V4.7
General information | |
---|---|
Trademark | Netac |
Model | Netac SSD 240GB |
Capacity | 223.5 GB |
Interface | SATA |
SATA version | 3.2 |
Firmware | V4.7 |
Alternative firmwares | 13 |
Firmware upgrade | supported |
SSD controller | Marvell |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 1 |
Times tested | 1 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum read speed | 326 MB/s |
Minimum average access time | 0.27 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | not supported |
TRIM | supported |
Reliability | |
Count of sensors | 28 |
SCT Transport | not supported |
Duration of full self test | 1 minutes |
Maximum temperature | 48°C (118°F) |
Average maximum temperature | 48°C (118°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | not supported |
Trusted computing | not supported |