Parameters of OCZ-VERTEX2 with 1.11 Firmware
| General information | |
|---|---|
| Trademark | OCZ |
| Model | OCZ-VERTEX2 |
| Capacity | 111.7 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | 1.11 |
| Alternative firmwares | 13 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 4 |
| Times tested | 4 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 249 MB/s |
| Maximum read speed | 236 MB/s |
| Minimum average access time | 0.10 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | not supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 19 |
| SCT Transport | supported |
| Duration of full self test | 48 minutes |
| Maximum temperature | 1°C (33°F) |
| Average maximum temperature | 0°C (32°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Instant information destruction | not supported |
| Hidden partition | supported |
| Partition access restriction | supported |
| Trusted Computing | not supported |