Parameters of ST3200826A with Firmware 3.02
General information | |
---|---|
Trademark | Seagate |
Model | ST3200826A |
Capacity | 186.3 GB |
Interface | PATA |
Maximum Ultra DMA mode | 5 |
Firmware | 3.02 |
Alternative firmwares | 4 |
Firmware upgrade | supported |
ATA version | 7 |
Advanced Format | not supported |
Units tested | 3 |
Times tested | 19 |
Performance | |
Maximum interface speed | 100 MB/s |
Maximum buffered read speed | 91 MB/s |
Maximum read speed | 69 MB/s |
Minimum average access time | 15.0 msec |
Cache buffer | 8 MB |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (TCQ) | not supported |
Advanced Power Management (APM) | not supported |
Acoustic Management (AAM) | not supported |
Reliability | |
Count of sensors | 15 |
Free-fall Control | not supported |
SMART Command Transport (SCT) | not supported |
Duration of full self test | 67 minutes |
Maximum temperature | 53°C (127°F) |
Average maximum temperature | 52°C (125°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | not supported |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |