Parameters of ST3200826AS with 3.02 Firmware
General information | |
---|---|
Trademark | Seagate |
Model | ST3200826AS |
Capacity | 186.3 GB |
Interface | SATA |
Firmware | 3.02 |
Alternative firmwares | 4 |
Firmware upgrade | supported |
ATA version | 7 |
Advanced Format | not supported |
Units tested | 3 |
Times tested | 3 |
Performance | |
Maximum interface speed | 150 MB/s |
Maximum buffered read speed | 128 MB/s |
Maximum read speed | 69 MB/s |
Minimum average access time | 15.70 msec |
Cache buffer | 8 MB |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | not supported |
Acoustic Management (AAM) | not supported |
Reliability | |
Count of sensors | 15 |
Free-fall Control | not supported |
SCT Transport | not supported |
Duration of full self test | 67 minutes |
Highest temperature | 60°C (140°F) |
Average highest temperature | 47°C (116°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | not supported |
Instant information destruction | not supported |
Hidden partition | supported |
Partition access restriction | supported |
Trusted Computing | not supported |