Parameters of WDC WD1001X06X-00SJVT0 with Firmware 01.01A02
General information | |
---|---|
Trademark | Western digital |
Model | WDC WD1001X06X-00SJVT0 |
Capacity | 1 TB |
Interface | SATA |
SATA version | 3.1 |
Firmware | 01.01A02 |
Alternative firmwares | 1 |
Firmware upgrade | supported |
SSD controller | JMicron61x |
ATA version | ACS-2 |
Advanced Format | not supported |
Units tested | 2 |
Times tested | 6 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 325 MB/s |
Maximum read speed | 120 MB/s |
Minimum average access time | 18.18 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | not supported |
TRIM | supported |
Reliability | |
Count of sensors | 19 |
SMART Command Transport (SCT) | supported |
Duration of full self test | 1 minutes |
Maximum temperature | 49°C (120°F) |
Average maximum temperature | 43°C (109°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | not supported |
Trusted computing | not supported |