Parameters of WDC WD10SPZX-24Z10 with Firmware 04.01A04
| General information | |
|---|---|
| Trademark | Western digital |
| Model | WDC WD10SPZX-24Z10 |
| Capacity | 931.5 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | 2.5" |
| Firmware | 04.01A04 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 32 |
| Times tested | 75 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 473 MB/s |
| Maximum read speed | 266 MB/s |
| Minimum average access time | 0.77 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 20 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 182 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 67°C (152°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 190 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |