Parameters of WDC WD1600BEVT-60ZCT1 with Firmware 13.01A13
| General information | |
|---|---|
| Trademark | Western digital |
| Model | WDC WD1600BEVT-60ZCT1 |
| Capacity | 149 GB |
| Interface | SATA |
| SATA version | 2.5 |
| Firmware | 13.01A13 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 17 |
| Times tested | 45 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 181 MB/s |
| Maximum read speed | 74 MB/s |
| Minimum average access time | 16.60 msec |
| Cache buffer | 8 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 20 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 68 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 80°C (176°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 56 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |