Parameters of WDC WD2500JB-00REA0 with Firmware 20.00K20
General information | |
---|---|
Trademark | Western digital |
Model | WDC WD2500JB-00REA0 |
Capacity | 232.8 GB |
Interface | PATA |
Maximum Ultra DMA mode | 5 |
Firmware | 20.00K20 |
Firmware upgrade | supported |
ATA version | 7 |
Advanced Format | not supported |
Units tested | 79 |
Times tested | 280 |
Performance | |
Maximum interface speed | 100 MB/s |
Maximum buffered read speed | 227 MB/s |
Maximum read speed | 75 MB/s |
Minimum average access time | 12.80 msec |
Cache buffer | 8 MB |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (TCQ) | not supported |
Advanced Power Management (APM) | not supported |
Acoustic Management (AAM) | supported |
Reliability | |
Count of sensors | 15 |
Free-fall Control | not supported |
SMART Command Transport (SCT) | supported |
Duration of full self test | 96 minutes |
Critical maximum temperature | 70°C (158°F) |
Recommended maximum temperature | 65°C (149°F) |
Maximum temperature | 84°C (183°F) |
Average maximum temperature | 44°C (111°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | not supported |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |