Parameters of WDC WD3000FYYZ-01UL1B1 with Firmware 01.01K02
| General information | |
|---|---|
| Trademark | Western digital |
| Model | WDC WD3000FYYZ-01UL1B1 |
| Capacity | 2.7 TB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | 01.01K02 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 5 |
| Times tested | 11 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 422 MB/s |
| Maximum read speed | 155 MB/s |
| Minimum average access time | 12.49 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 18 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | > 255 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 56°C (132°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 400 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |