Parameters of WDC WD7500AAKS-00RBA0 with Firmware 30.04G30
General information | |
---|---|
Trademark | Western digital |
Model | WDC WD7500AAKS-00RBA0 |
Capacity | 698.6 GB |
Interface | SATA |
Firmware | 30.04G30 |
Firmware upgrade | supported |
ATA version | 7 |
Advanced Format | not supported |
Units tested | 78 |
Times tested | 318 |
Performance | |
Maximum interface speed | 300 MB/s |
Maximum read speed | 231 MB/s |
Minimum average access time | 12.70 msec |
Cache buffer | 16 MB |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | not supported |
Acoustic Management (AAM) | supported |
Reliability | |
Count of sensors | 18 |
Free-fall Control | not supported |
SMART Command Transport (SCT) | supported |
Duration of full self test | 217 minutes |
Critical maximum temperature | 85°C (185°F) |
Recommended maximum temperature | 60°C (140°F) |
Maximum temperature | 73°C (163°F) |
Average maximum temperature | 46°C (114°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | not supported |
Data destruction time | 178 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |