Parameters of ADATA SX8000NP with Firmware C2.3.7a
| General information | |
|---|---|
| Trademark | Adata |
| Model | ADATA SX8000NP |
| Capacity | 128 GB (119.2 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.2 |
| Firmware | C2.3.7a |
| Firmware upgrade | supported |
| Maximum power consumption | 9 W |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum buffered read speed | 239 MiB/s |
| Maximum read speed | 181 MiB/s |
| Minimum average access time | 0.11 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | not supported |
| Throttling temperature control | not supported |
| Reliability | |
| Full self-test time | 5 minutes |
| Critical maximum temperature | 72°C (161°F) |
| Recommended maximum temperature | 62°C (143°F) |
| Maximum temperature | 57°C (134°F) |
| Average maximum temperature | 57°C (134°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |