Parameters of Apacer AS2280P4 2TB with Firmware APF00PI0
| General information | |
|---|---|
| Trademark | Apacer |
| Model | Apacer AS2280P4 2TB |
| Capacity | 2 TB (1.8 TiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.3 |
| Firmware | APF00PI0 |
| Firmware upgrade | supported |
| Maximum power consumption | 4 W |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 2 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum buffered read speed | 201 MiB/s |
| Maximum read speed | 160 MiB/s |
| Minimum average access time | 0.28 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | supported (64 MiB) |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 30 minutes |
| Critical maximum temperature | 80°C (176°F) |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 66°C (150°F) |
| Average maximum temperature | 66°C (150°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |