Parameters of HGST HUS726T6TALE6L4 with Firmware VKGNW9Y0
General information | |
---|---|
Trademark | Hitachi |
Model | HGST HUS726T6TALE6L4 |
Capacity | 698.6 GB |
Interface | SATA |
SATA version | 3.2 |
Form-factor | 3.5" |
Firmware | VKGNW9Y0 |
Alternative firmwares | 5 |
Firmware upgrade | supported |
ATA version | ACS-2 |
Advanced Format | not supported |
Units tested | 1 |
Times tested | 2 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 16447 MB/s |
Maximum read speed | 13357 MB/s |
Minimum average access time | 0.0 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Acoustic Management (AAM) | not supported |
Rotation rate | 7200 rpm |
Reliability | |
Count of sensors | 17 |
Free-fall Control | not supported |
SCT Transport | supported |
Duration of full self test | > 255 minutes |
Critical maximum temperature | 70°C (158°F) |
Recommended maximum temperature | 60°C (140°F) |
Maximum temperature | 46°C (114°F) |
Average maximum temperature | 46°C (114°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | not supported |
Data destruction time | 588 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |