Parameters of HP SSD EX900 Plus 256GB with Firmware 2.4.8.56
| General information | |
|---|---|
| Trademark | Hewlett Packard |
| Model | HP SSD EX900 Plus 256GB |
| Capacity | 256 GB (238.4 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.4 |
| Firmware | 2.4.8.56 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| Maximum power consumption | 3 W |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 3 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum buffered read speed | 1615 MiB/s |
| Maximum read speed | 1121 MiB/s |
| Minimum average access time | 0.14 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | supported (64 MiB) |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 5 minutes |
| Critical maximum temperature | 87°C (188°F) |
| Recommended maximum temperature | 85°C (185°F) |
| Maximum temperature | 51°C (123°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |