Parameters of HP SSD FX900 Plus M.2 1TB with Firmware SN10191
| General information | |
|---|---|
| Trademark | Hewlett Packard |
| Model | HP SSD FX900 Plus M.2 1TB |
| Capacity | 1 TB (953.8 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.4 |
| Firmware | SN10191 |
| Firmware upgrade | supported |
| Maximum power consumption | 6 W |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 4 |
| Performance | |
| Maximum interface speed | 7876 MB/s (PCIe 4.0 x4) |
| Maximum buffered read speed | 3049 MiB/s |
| Maximum read speed | 2917 MiB/s |
| Minimum average access time | 0.2 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | supported (32 MiB) |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 30 minutes |
| Critical maximum temperature | 95°C (203°F) |
| Recommended maximum temperature | 90°C (194°F) |
| Maximum temperature | 44°C (111°F) |
| Average maximum temperature | 43°C (109°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |