Parameters of INTEL SSDPEKKF256G7H with Firmware HP01
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDPEKKF256G7H |
| Capacity | 256 GB (238.4 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.2 |
| Firmware | HP01 |
| Firmware upgrade | supported |
| Maximum power consumption | 9 W |
| Advanced Format | not supported |
| Units tested | 2 |
| Times tested | 2 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum buffered read speed | 993 MiB/s |
| Maximum read speed | 820 MiB/s |
| Minimum average access time | 0.15 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | not supported |
| Throttling temperature control | not supported |
| Reliability | |
| Self-test | not supported |
| Critical maximum temperature | 80°C (176°F) |
| Recommended maximum temperature | 65°C (149°F) |
| Maximum temperature | 29°C (84°F) |
| Average maximum temperature | 27°C (80°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |