Parameters of INTEL SSDPEKNW020T8 with Firmware 004C
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDPEKNW020T8 |
| Capacity | 2 TB (1.8 TiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.3 |
| Firmware | 004C |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| Maximum power consumption | 5 W |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 5 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum read speed | 1336 MiB/s |
| Minimum average access time | 0.11 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | not supported |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 5 minutes |
| Critical maximum temperature | 80°C (176°F) |
| Recommended maximum temperature | 77°C (170°F) |
| Maximum temperature | 44°C (111°F) |
| Average maximum temperature | 41°C (105°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | supported |