Parameters of Lexar SSD NQ7A1 2TB with Firmware V1.2.3
| General information | |
|---|---|
| Trademark | Lexar |
| Model | Lexar SSD NQ7A1 2TB |
| Capacity | 2 TB (1.8 TiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 2.0 |
| Firmware | V1.2.3 |
| Firmware upgrade | supported |
| Maximum power consumption | 6 W |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 3 |
| Performance | |
| Maximum interface speed | 7876 MB/s (PCIe 4.0 x4) |
| Maximum read speed | 1944 MiB/s |
| Minimum average access time | 0.21 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | supported (40 MiB) |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 30 minutes |
| Critical maximum temperature | 95°C (203°F) |
| Recommended maximum temperature | 90°C (194°F) |
| Maximum temperature | 60°C (140°F) |
| Average maximum temperature | 57°C (134°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | supported |