Parameters of Micron MTFDHBA256TCK with Firmware 002 P1LN
| General information | |
|---|---|
| Trademark | Micron |
| Model | Micron MTFDHBA256TCK |
| Capacity | 256 GB (238.4 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.2.1 |
| Firmware | 002 P1LN |
| Firmware upgrade | supported |
| Maximum power consumption | 8 W |
| Advanced Format | not supported |
| Units tested | 3 |
| Times tested | 3 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum buffered read speed | 880 MiB/s |
| Maximum read speed | 676 MiB/s |
| Minimum average access time | 0.9 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | not supported |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 15 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 82°C (179°F) |
| Maximum temperature | 65°C (149°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |