Parameters of Micron MTFDHBA256TDV with Firmware 3006P4LN
| General information | |
|---|---|
| Trademark | Micron |
| Model | Micron MTFDHBA256TDV |
| Capacity | 256 GB (238.4 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.3 |
| Firmware | 3006P4LN |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| Maximum power consumption | 8 W |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum buffered read speed | 537 MiB/s |
| Maximum read speed | 515 MiB/s |
| Minimum average access time | 0.6 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | not supported |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 15 minutes |
| Critical maximum temperature | 81°C (177°F) |
| Recommended maximum temperature | 78°C (172°F) |
| Maximum temperature | 64°C (147°F) |
| Average maximum temperature | 64°C (147°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | supported |