Parameters of ST3120022A with Firmware 9.51
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST3120022A |
| Capacity | 111.7 GB |
| Interface | PATA |
| Maximum Ultra DMA mode | 5 |
| Firmware | 9.51 |
| Alternative firmwares | 10 |
| Firmware upgrade | supported |
| ATA version | 4 |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 100 MB/s |
| Maximum buffered read speed | 85 MB/s |
| Maximum read speed | 49 MB/s |
| Minimum average access time | 12.90 msec |
| Cache buffer | 2 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (TCQ) | not supported |
| Advanced Power Management (APM) | not supported |
| Acoustic Management (AAM) | not supported |
| Reliability | |
| Count of sensors | 15 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | not supported |
| Duration of full self test | 85 minutes |
| Maximum temperature | 54°C (129°F) |
| Average maximum temperature | 54°C (129°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |