Parameters of SanDisk Extreme Pro 1TB with Firmware 111130WD
| General information | |
|---|---|
| Trademark | SanDisk |
| Model | SanDisk Extreme Pro 1TB |
| Capacity | 1 TB (931.5 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.3 |
| Firmware | 111130WD |
| Firmware upgrade | supported |
| Maximum power consumption | 6 W |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 3940 MB/s (PCIe 3.0 x4) |
| Maximum buffered read speed | 1701 MiB/s |
| Maximum read speed | 1541 MiB/s |
| Minimum average access time | 0.20 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | not supported |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 102 minutes |
| Critical maximum temperature | 88°C (190°F) |
| Recommended maximum temperature | 84°C (183°F) |
| Maximum temperature | 45°C (113°F) |
| Average maximum temperature | 45°C (113°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |