Parameters of WALRAM 128GB with Firmware X0925A
| General information | |
|---|---|
| Trademark | Walram |
| Model | WALRAM 128GB |
| Capacity | 128 GB (119.2 GiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.3 |
| Firmware | X0925A |
| Alternative firmwares | 7 |
| Firmware upgrade | supported |
| Maximum power consumption | 9 W |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 1970 MB/s (PCIe 3.0 x2) |
| Maximum read speed | 345 MiB/s |
| Minimum average access time | 0.10 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | supported (64 MiB) |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 5 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 83°C (181°F) |
| Maximum temperature | 64°C (147°F) |
| Average maximum temperature | 64°C (147°F) |
| Security | |
| Drive access restriction | not supported |
| Instant data destruction | not supported |