Parameters of XG7000-2TB 2280 with Firmware X0430J00
| General information | |
|---|---|
| Trademark | KingSpec |
| Model | XG7000-2TB 2280 |
| Capacity | 2 TB (1.8 TiB) |
| Type | SSD |
| Interface | NVMe |
| NVMe version | 1.4 |
| Firmware | X0430J00 |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| Maximum power consumption | 4 W |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 3 |
| Performance | |
| Maximum interface speed | 7876 MB/s (PCIe 4.0 x4) |
| Maximum read speed | 2439 MiB/s |
| Minimum average access time | 0.64 msec |
| Clearing unused data (TRIM) | supported |
| Host memory buffer (HMB) | supported (64 MiB) |
| Throttling temperature control | supported |
| Reliability | |
| Full self-test time | 15 minutes |
| Critical maximum temperature | 93°C (199°F) |
| Recommended maximum temperature | 86°C (186°F) |
| Maximum temperature | 53°C (127°F) |
| Average maximum temperature | 45°C (113°F) |
| Security | |
| Drive access restriction | supported |
| Instant data destruction | not supported |