Parameters of ADATA SP920SS with Firmware 1.14
| General information | |
|---|---|
| Trademark | Adata |
| Model | ADATA SP920SS |
| Capacity | 119.2 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | 1.14 |
| Alternative firmwares | 6 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 4 |
| Times tested | 8 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum read speed | 378 MB/s |
| Minimum average access time | 0.9 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 14 |
| SCT Transport | not supported |
| Duration of full self test | 10 minutes |
| Maximum temperature | 39°C (102°F) |
| Average maximum temperature | 36°C (96°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted Computing | not supported |