Parameters of ADATA XM11 256GB-V2 with 5.0.2a Firmware
| General information | |
|---|---|
| Trademark | Adata |
| Model | ADATA XM11 256GB-V2 |
| Capacity | 238.4 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | 5.0.2a |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 3 |
| Times tested | 16 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 454 MB/s |
| Maximum read speed | 414 MB/s |
| Minimum average access time | 0.16 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 22 |
| SCT Transport | supported |
| Duration of full self test | 48 minutes |
| Maximum temperature limit | 223°C (177°F) |
| Maximum recommended temperature | 120°C (248°F) |
| Highest temperature | 87°C (188°F) |
| Average highest temperature | 84°C (183°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Complete destruction of information | 2 minutes |
| Instant information destruction | not supported |
| Hidden partition | supported |
| Partition access restriction | not supported |
| Trusted Computing | not supported |