CT250MX500SSD1 with Firmware M3CR043 Information
| Common characteristics | |
|---|---|
| Trademark | Crucial |
| Model | CT250MX500SSD1 |
| Capacity | 232.8 GB |
| Interface | SATA |
| SATA version | 3.3 |
| Form-factor | 2.5" |
| Firmware | M3CR043 |
| Alternative firmwares | 5 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 4 |
| Times tested | 8 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 336 MB/s |
| Maximum read speed | 303 MB/s |
| Minimum average access time | 0.7 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 23 |
| SCT Transport | supported |
| Duration of full self test | 30 minutes |
| Maximum temperature limit | 100°C (212°F) |
| Maximum recommended temperature | 100°C (212°F) |
| Highest temperature | 45°C (113°F) |
| Average highest temperature | 40°C (104°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Complete destruction of information | 2 minutes |
| Instant information destruction | supported |
| Hidden partition | not supported |
| Partition access restriction | not supported |
| Trusted Computing | supported |