Parameters of Corsair Force GS with Firmware 5.20
| General information | |
|---|---|
| Trademark | Corsair |
| Model | Corsair Force GS |
| Capacity | 360 GB (335.3 GiB) |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.0 |
| Controller | SandForce |
| Firmware | 5.20 |
| Alternative firmwares | 6 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 3 |
| Times tested | 5 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 411 MiB/s |
| Maximum read speed | 391 MiB/s |
| Minimum average access time | 0.20 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Device sleep (DevSleep) | not supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 22 |
| SMART command transport (SCT) | supported |
| Full self-test time | 48 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 65°C (149°F) |
| Maximum temperature | 55°C (131°F) |
| Average maximum temperature | 49°C (120°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 4 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |