Parameters of HECTRON HECX1-240G with Firmware H1DB11
General information | |
---|---|
Trademark | Drevo |
Model | HECTRON HECX1-240G |
Capacity | 223.5 GB |
Interface | SATA |
SATA version | 3.1 |
Firmware | H1DB11 |
Firmware upgrade | supported |
SSD controller | Silicon Motion |
ATA version | ACS-2 |
Advanced Format | supported |
Units tested | 2 |
Times tested | 9 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum read speed | 451 MB/s |
Minimum average access time | 0.7 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | not supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 27 |
SMART Command Transport (SCT) | supported |
Duration of full self test | 2 minutes |
Recommended maximum temperature | 100°C (212°F) |
Maximum temperature | 46°C (114°F) |
Average maximum temperature | 39°C (102°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |