Parameters of HGST HUS726T4TALE6L4 with Firmware VKGNW40H
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | HGST HUS726T4TALE6L4 |
| Capacity | 3.6 TB |
| Interface | SATA |
| SATA version | 3.2 |
| Form-factor | 3.5" |
| Firmware | VKGNW40H |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| ATA version | ACS-2 |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 6 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 419 MB/s |
| Maximum read speed | 245 MB/s |
| Minimum average access time | 12.30 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SCT Transport | supported |
| Duration of full self test | > 255 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 45°C (113°F) |
| Average maximum temperature | 45°C (113°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 386 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |