Parameters of HGST HUS726T6TALE6L4 with Firmware VKGNW40H
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | HGST HUS726T6TALE6L4 |
| Capacity | 5.4 TB |
| Interface | SATA |
| SATA version | 3.2 |
| Form-factor | 3.5" |
| Firmware | VKGNW40H |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| ATA version | ACS-2 |
| Advanced Format | supported |
| Units tested | 4 |
| Times tested | 8 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 265 MB/s |
| Maximum read speed | 228 MB/s |
| Minimum average access time | 10.64 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | > 255 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 60°C (140°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 624 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |