Parameters of HP SSD S600 240GB with Firmware 04C0B107
General information | |
---|---|
Trademark | Hewlett Packard |
Model | HP SSD S600 240GB |
Capacity | 223.5 GB |
Interface | SATA |
SATA version | 3.2 |
Form-factor | 2.5" |
Firmware | 04C0B107 |
Alternative firmwares | 1 |
Firmware upgrade | supported |
SSD controller | Unknown |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 2 |
Times tested | 5 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 231 MB/s |
Maximum read speed | 207 MB/s |
Minimum average access time | 0.19 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 16 |
SCT Transport | not supported |
Duration of full self test | 1 minutes |
Maximum temperature | 29°C (84°F) |
Average maximum temperature | 27°C (80°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 6 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | not supported |
Trusted Computing | not supported |