Parameters of HS-SSD-C100 480G with Firmware SN07347
General information | |
---|---|
Trademark | Hikvision |
Model | HS-SSD-C100 480G |
Capacity | 447.1 GB |
Interface | SATA |
SATA version | 3.2 |
Form-factor | 2.5" |
Firmware | SN07347 |
Alternative firmwares | 6 |
Firmware upgrade | supported |
SSD controller | Maxiotek |
ATA version | ACS-4 |
Advanced Format | not supported |
Units tested | 2 |
Times tested | 6 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 440 MB/s |
Maximum read speed | 386 MB/s |
Minimum average access time | 0.6 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | not supported |
Device Sleep (DevSleep) | not supported |
TRIM | supported |
Reliability | |
Count of sensors | 25 |
SCT Transport | supported |
Duration of full self test | 2 minutes |
Recommended maximum temperature | 127°C (260°F) |
Maximum temperature | 35°C (95°F) |
Average maximum temperature | 29°C (84°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | not supported |
Trusted Computing | not supported |