Parameters of Hitachi HCP725050GLAT80 with Firmware GM4OA4CA
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | Hitachi HCP725050GLAT80 |
| Capacity | 465.7 GB |
| Interface | PATA |
| Maximum Ultra DMA mode | 6 |
| Firmware | GM4OA4CA |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 2 |
| Times tested | 5 |
| Performance | |
| Maximum interface speed | 133 MB/s |
| Maximum buffered read speed | 120 MB/s |
| Maximum read speed | 94 MB/s |
| Minimum average access time | 18.70 msec |
| Cache buffer | 7 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (TCQ) | not supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 131 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 54°C (129°F) |
| Average maximum temperature | 48°C (118°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 184 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |