Parameters of Hitachi HCS5C1032CLA382 with Firmware JCFOR39G
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | Hitachi HCS5C1032CLA382 |
| Capacity | 298 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 3.5" |
| Firmware | JCFOR39G |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 3 |
| Times tested | 3 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 250 MB/s |
| Maximum read speed | 77 MB/s |
| Minimum average access time | 19.38 msec |
| Cache buffer | 6 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | supported |
| Rotation rate | 5700 rpm |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SCT Transport | supported |
| Duration of full self test | 120 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 59°C (138°F) |
| Average maximum temperature | 54°C (129°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 144 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted Computing | not supported |