Parameters of Hitachi HDT721010SLA360 with Firmware ST6OA39D
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | Hitachi HDT721010SLA360 |
| Capacity | 931.5 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | ST6OA39D |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 3 |
| Times tested | 4 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 236 MB/s |
| Maximum read speed | 105 MB/s |
| Minimum average access time | 17.20 msec |
| Cache buffer | 14.6 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 235 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 61°C (141°F) |
| Average maximum temperature | 53°C (127°F) |
| Security | |
| Drive access restriction | not supported |
| Enhanced security erase | not supported |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |