Parameters of Hitachi HDT721025SLA380 with Firmware STBOA3BB
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | Hitachi HDT721025SLA380 |
| Capacity | 232.8 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | STBOA3BB |
| Alternative firmwares | 5 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 245 MB/s |
| Maximum read speed | 54 MB/s |
| Minimum average access time | 26.37 msec |
| Cache buffer | 6.8 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Acoustic Management (AAM) | not supported |
| Reliability | |
| Count of sensors | 21 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 78 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 49°C (120°F) |
| Average maximum temperature | 49°C (120°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 108 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |