Parameters of Hitachi HDT721032SLA380 with ST2OA31B Firmware
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | Hitachi HDT721032SLA380 |
| Capacity | 298 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | ST2OA31B |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 17 |
| Times tested | 32 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 255 MB/s |
| Maximum read speed | 117 MB/s |
| Minimum average access time | 17.70 msec |
| Cache buffer | 6.8 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SCT Transport | supported |
| Duration of full self test | 79 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 61°C (141°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Complete destruction of information | 108 minutes |
| Instant information destruction | not supported |
| Hidden partition | supported |
| Partition access restriction | supported |
| Trusted Computing | not supported |