Parameters of Hitachi HDT725032VLAT80 with Firmware V54OA4NA
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | Hitachi HDT725032VLAT80 |
| Capacity | 298 GB |
| Interface | PATA |
| Maximum Ultra DMA mode | 6 |
| Firmware | V54OA4NA |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | 7 |
| Advanced Format | not supported |
| Units tested | 5 |
| Times tested | 12 |
| Performance | |
| Maximum interface speed | 133 MB/s |
| Maximum buffered read speed | 119 MB/s |
| Maximum read speed | 74 MB/s |
| Minimum average access time | 12.92 msec |
| Cache buffer | 7.1 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (TCQ) | not supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | supported |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 94 minutes |
| Critical maximum temperature | 65°C (149°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 56°C (132°F) |
| Average maximum temperature | 42°C (107°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 128 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |