Parameters of Hitachi HTS547564A9E384 with Firmware JEDOA50B
| General information | |
|---|---|
| Trademark | Hitachi |
| Model | Hitachi HTS547564A9E384 |
| Capacity | 596.1 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 2.5" |
| Firmware | JEDOA50B |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 13 |
| Times tested | 14 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 241 MB/s |
| Maximum read speed | 95 MB/s |
| Minimum average access time | 20.12 msec |
| Cache buffer | 8 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 21 |
| Free-fall Control | not supported |
| SCT Transport | supported |
| Duration of full self test | 195 minutes |
| Critical maximum temperature | 65°C (149°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 54°C (129°F) |
| Average maximum temperature | 45°C (113°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 194 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |