Parameters of INTEL SSDSA2CW080G3 with Firmware 4PC10362
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDSA2CW080G3 |
| Capacity | 74.5 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | 4PC10362 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | Intel |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 13 |
| Times tested | 33 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 253 MB/s |
| Maximum read speed | 249 MB/s |
| Minimum average access time | 0.6 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 21 |
| SCT Transport | supported |
| Duration of full self test | 1 minutes |
| Temperature sensor | not supported |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted Computing | not supported |