Parameters of INTEL SSDSC2BA400G4 with G2010150 Firmware
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDSC2BA400G4 |
| Capacity | 372.6 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 2.5" |
| Firmware | G2010150 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | ACS-2 |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 252 MB/s |
| Maximum read speed | 238 MB/s |
| Minimum average access time | 0.8 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | not supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 26 |
| SCT Transport | supported |
| Duration of full self test | 2 minutes |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 42°C (107°F) |
| Average maximum temperature | 42°C (107°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Complete destruction of information | 4 minutes |
| Instant information destruction | supported |
| Hidden partition | supported |
| Partition access restriction | supported |
| Trusted Computing | not supported |