Parameters of INTEL SSDSC2BB080G4 with Firmware D2010355
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDSC2BB080G4 |
| Capacity | 74.5 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 2.5" |
| Firmware | D2010355 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 2 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 449 MB/s |
| Maximum read speed | 283 MB/s |
| Minimum average access time | 0.9 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 25 |
| SCT Transport | supported |
| Duration of full self test | 2 minutes |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 39°C (102°F) |
| Average maximum temperature | 37°C (98°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted Computing | not supported |