Parameters of INTEL SSDSC2BF180A4H with LH6i Firmware
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDSC2BF180A4H |
| Capacity | 167.6 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | LH6i |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 6 |
| Times tested | 22 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 443 MB/s |
| Maximum read speed | 337 MB/s |
| Minimum average access time | 0.16 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 22 |
| SCT Transport | supported |
| Duration of full self test | 58 minutes |
| Critical maximum temperature | 75°C (167°F) |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 72°C (161°F) |
| Average maximum temperature | 65°C (149°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Complete destruction of information | 4 minutes |
| Instant information destruction | not supported |
| Hidden partition | not supported |
| Partition access restriction | not supported |
| Trusted Computing | not supported |